:

Clear
Clear
5 Inch Lift Kit w/ Radius Arm Ford F250/F350 Super Duty 23-24 4WD Diesel 5 Inch Block with 3 Leaf...
  • Sale

        BDS Suspension — 5 Inch Lift Kit w/ Radius Arm Ford F250/F350 Super Duty 23-24 4WD Diesel 5 Inch Block with 3 Leaf Main NX2 Nitro

        SKU: BLDV-BDS2203H

        Easy 100% Bolt-on installation

        0.0
        BDS Suspension
        Vehicle Specific
        Check if this part fits your vehicle.
        • Brand: BDS Suspension
          • 20% off
          $2601.23CAD save $520.25CAD
        • $2080.98CAD

        OR

        Improve the ride on your 23-24 Ford Super Duty diesel truck with this 5-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37 inch Tires.

        Up front the lift kit includes diesel-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned nitrogen charged shocks.

        In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of NX2 Nitro or FOX Performance shocks.

        HD Radius Arms

        In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.

        Pro-Ride Coil Springs

        A pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

        Steering Correction

        To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

        • Front Lift Method: Coil Spring
        • Rear Lift Method: Leaf Spring
        • Shocks Included: Yes
        • Front Lift Height: 5 inch
        • Rear Lift Height: 4 inch
        1. Vehicles with radius arm mounted ride height sensors will require BDS123303.
        2. Ford recommends the replacement of the pitman arm nut after each time it has been removed.
        3. Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper.
        4. If your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402.
        5. Due to the taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models.
        6. Larger Tires on stock wheel are not recommended due to interference with brake line, radius arm and sway bar. Use recommended specs listed in wheel and Tire fitment section.
        7. Minor trimming may be necessary for clearance of 37x12.50 Tires on certain wheel setups.
        8. Installation requires a torque wrench capable of 406 ft-lbs.
        9. Vehicles with leaf spring ride height sensors must select the rear block option.
        • Easy, 100 percent Bolt-on installation
        • Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
        • Heavy duty tubular steel radius arms that correct caster while maximizing ground clearance
        • Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
        • Fabricated steel blocks provide level stance from front to rear
        • Standard NX2 Nitro shocks with vehicle-specific valving for better control
        • Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road

        Rear Lift Option5 Inch Block with 3 Leaf Main

        Some F250/350 factory options increase the main leaf pack count from 2 to 3 leaf's (this is for top overload options only). Be sure to verify which factory leaf spring configuration your vehicle has and choose the appropriate option.

        Tire Size: 37 x 12.5 Tire Size 2: 37 x 12.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 20 x 9 Back Spacing: 5/5

        Shock OptionNX2 Nitro Series

        • Nitrogen-charged
        • Twin-tube design
        • 10-stage velocity-sensitive valving
        • Dual-welded ends for increased strength
        • 1-3/8-inch high-flow piston
        • Self-lubricating seals
        • Silver powder coat finish

        Kit Components:

        • Includes one BDS013414, 2017-2024 Super Duty 4 inch Front Box Kit, UPC Code 658848613458
        • Includes one BDS013516, 2017-2024 F250 5 inch Rear Block Kit -3 Leaf Main, UPC Code 658848613595
        • Includes one BDS033411, 2005-2024 Ford F250/F350 Superduty 4 inch Coil Kit - Diesel, UPC Code 658848616527
        • Includes one BDS123263, 2023-2024 Ford F250/350 4wd Radius Arm Kit, Pair, UPC Code 711745612709
        • Includes one BDS85431, 2017-2024 F250/F350 Single Stabilizer, UPC Code 711745609242
        • Includes two BDS85700, Shock- 25.20 x 15.20 x 2-3/8 - S50/EB2, UPC Code 711745609495
        • Includes two BDS85718, Shock - 33.00 x 19.25 x 2-3/8 - EB1/EB1, UPC Code 711745609563

          • SKU
            BLDV-BDS2203H
          • Weight
            228.15 lbs
          • Dimensions (L x W x H)
            16.5 x 12.5 x 9.5 in
          • Barcode
            840416406047
          • Manufacturer Part #
            BDS2203H
        • Shocks Included
          Yes
        • Finish
          Powdercoat
        • Property 65 Warning
          CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
        • Vehicle Type
          Truck/SUV
        • Drive
          4WD
        • Color
          Silver
        • Brand
          BDS Suspension
        • Country of Origin
          USA
        • Sold As
          Kit
        • Warranty
          Lifetime Replacement Warranty Extends to Cover all BDS Hard Parts
        • Fitment
          • Fitment Type
            Vehicle Specific
        YearMakeModelSubmodelNotes
        2024FordF-250 Super DutyKing Ranch
        2024FordF-250 Super DutyLariat
        2024FordF-250 Super DutyLimited
        2024FordF-250 Super DutyPlatinum
        2024FordF-250 Super DutyXL
        2024FordF-250 Super DutyXLT
        2024FordF-350 Super DutyKing Ranch
        2024FordF-350 Super DutyLariat
        2024FordF-350 Super DutyLimited
        2024FordF-350 Super DutyPlatinum
        2024FordF-350 Super DutyXL
        2024FordF-350 Super DutyXLT
        Customer reviews
        Please sign in to add review
        There are no comments yet. Be the first to leave a comment

        Violette Motors LTD (DBA VMCustoms.ca) is proud to offer low shipping fees on most products and orders*. 


        Average order processing time is 1-3 business days for in-stock items. 


        Once your order has been processed and prepared, a tracking number will be emailed to you. 


        * Some restrictions apply (may require additional shipping charges): 


        Shipments to rural areas. 

        Shipments to Northwest Territories, Yukon, Nunavut and Labrador. 

        Certain oversized products.

        If your order requires additional shipping charges, we will contact you by e-mail to obtain confirmation of the additional shipping charges. 


        If you encounter a problem with your shipment, please contact us immediately. 


        If one or more items in your order have been lost or damaged by the carrier, don't worry, all our shipments are insured. 


        Violette Motors LTD (DBA VMCustoms.ca) is not responsible for lost or stolen items.

        Returns & Exchanges
        In the event that you:

        Purchased the incorrect part or size,
        No longer need a product purchased,
        Were sent the incorrect product contrary to what was described on the website,
        Purchased a product that came defective, damaged or faulty,
        Are not satisfied with the purchase, or
        Purchased the wrong product accidentally,
        We ask you contact our customer service representatives and they will help assist with the next best steps. While each particular category identified above has their own special rules and conditions (please read below), there are some general rules which apply to all returns or exchanges:

        All returns and exchanges must be made via our Return Procedure with a valid & signed RMA form.
        Product(s) must be in new condition and in the original packaging. In no event will we accept a product return that is in a poor condition.
        Any returns related to defects, damage, fitment or other flaws will require additional inspection. Depending on the product, we may also require that you sent the product back to the source for inspection. In the event that you bring the product to your own mechanic who provides a report, we reserve the right to request verification by having the product shipped back to our source for additional inspection.
        Any returns related to incorrect parts, sizes, purchased in error, or parts no longer needed, do not in any way assemble, install, or modify the product.
        Any product that was used or fully/partially installed is non-returnable.
        In some cases, return of the physical product may not be required. For these products, instructions will be provided on how to process a field destroy or dispose of the original item.
        The few exceptions for items that cannot be returned include:
        Items Marked "Non-Returnable" (clearly indicated on the product page before placing your order).
        Custom Built Orders.
        Custom Wheels & Tires Packages.
        What are my shipping fees?
        For orders delivered within Canada where the reason for return is based on the customer

        No longer needing or wanting the product,
        Purchasing the wrong product where the description is proper, or
        Providing any reason which isn't a result of a VMcustoms error,
        The cost of the initial shipping charge and a return fee , per item will be deducted from your refund. A prepaid shipping label(s) will be provided.

        As it concerns products requiring freight, LTL shipping, while returns are accepted, note that the shipping charges will be reduced in an amount based on the estimate from the shipping carrier, which may be substantially higher than the costs outlined above. As such, it may result in the shipping costs exceeding the costs of the product.

        Also note that coordination the return shipping will be the responsibility of the customer. In the event an error is made by VMcustoms, a return shipping label will be provided.

        Core deposits
        Some products sold on VMcustoms include a core deposit. These parts have a deposit that is charged upon purchase and fully refunded upon the return of the core. Cores must be in rebuildable condition and matching vehicle application to the product sold. Once the product is received and inspected, the deposit will be refunded to your original form of payment. Note: Product cores returned that are not fully assembled or are not the unit that was removed from the vehicle, will not be refunded and the core will be discarded. Detailed instructions on Core Deposit Returns can be found here.

        Defective, damaged, or incorrect products
        While VMcustoms strives to ensure that the products purchased will be the right fit, the first time, in perfect condition and proper fitment, sometimes due to factors outside of our control, products may be damaged in transit, defective from the assembly line or otherwise are simply incorrect.

        If your product(s) arrive defective, damaged, flawed or simply incorrect, not at the fault of the customer, do not attempt to use, install, modify, or repair the part. Please contact our customer service team, who will assist during the process, work with you, and find the best solution of your issue.

        In the event of an exchange or replacement, once you have contacted our customer service team, our team will work with you to help facilitate the transaction. During this time, photos or video of the particular damage, defect, or fitment issues may be requested in order to correctly process your request, access the issue and underlying cause, and determine the next best steps.

        If accepted, we will provide you with a prepaid return label to return the defective part. Upon return, we will inspect the part, which may require additional proofs, such as photos, videos or assessments, and upon confirmation of the defect at no fault of the customer, the exchange or replacement will be processed. In limited instances, return of the product may not be required, and in this event, additional steps may need to be taken as well.

        Products must be returned to us within 30 days of delivery. If the damage was caused by a shipping courier, we will schedule a damage pick up by the courier. Please note that products must be in the original packaging and there are additional requirements for products that ship freight.

        Please be advised that the returns, refunds or exchanges under this section do not apply to warranty claims. Warranties on products are offered by the manufacturers, and each manufacturers' timeframes, terms and conditions, and schedules vary. You can find more information on how warranty claims are processed by clicking here. While warranty claims are specific to each manufacturer, VMcustoms will administer all warranty claims so that it may be as seamless as possible for our customers.

        Order cancellations
        We will assist with cancellation of an order or part(s) that have not been shipped and are not marked as non-cancelable / non-refundable items. Items that have been shipped already cannot be canceled or modified. Cancellations can be done online by submitting a request, or through our customer care team who can be reached via live chat or phone. Your request will be processed as quickly as possible, but please note that sometimes products ship quicker than expected.

        For more information on order cancellations please click here.

        Billing, refunds & credits
        Payment for orders may be captured as soon as the order has been successfully placed. Refunds for returned products are issued when we confirm receipt of on the returned product in satisfactory condition. Refunds will be issued via the same payment method originally used to place the order (Credit Card, PayPal, Affirm). Once the refund has been issued a confirmation email will be sent. Please allow an additional 5-7 business days for the credit to appear on your account. more details on terms-and-conditions.tab